A plasma company in Kunshan ＂Plasma activation on display surface＂_Guanghejie intelligent equipment (Suzhou) Co., Ltd

Case

A plasma company in Kunshan ＂Plasma activation on display surface＂

时间：2020-06-24 17:21 Number of hits:

1. Project Introduction

Introducing advanced German technology, the structure of the linear plasma cleaning machine is mainly divided into three parts, namely the control unit, radio frequency power supply and plasma generator. It is a material surface treatment technology, mainly focusing on material surface cleaning, activation, etching, layer.
Features: atmospheric pressure plasma cleaning equipment with the same processing effect as vacuum plasma cleaning machine. A high-performance surface treatment technology, atmospheric pressure glow plasma technology, in addition to being able to reproduce the quality of vacuum plasma in atmospheric pressure, it can also generate more high-energy free radicals than vacuum plasma and can perform surface treatment more quickly.
The advantages of this equipment:
1. Good processing effect, the same processing effect as vacuum plasma cleaning machine
2. Fast efficiency, the argon plasma cleaning machine emits light for the entire light strip, no need for plasma head to move
3. Low temperature, baseband temperature is less than 40 °
4, wide width can be customized according to customer needs, 0-3 meters
5, good processing uniformity
6, compact structure, easy to connect with customer pipeline and grafted to customer pipeline
7, plasma power supply voltage is low, without damaging the product

Second, the machine configuration

Machine configuration
model	CON50-AR	CON80-AR
Way of working	Atmospheric linear light output
power	750W	1000W
Processing range	500mm	800mm
Processing height	0-6mm, the closer the flame is to the product, the better the effect
Equipment size	L1500W1000H1560mm	L1500W1300H1560mm
Belt line transmission speed	MAX 25mm/sec
weight	280KG
Input power	220VAC, 50HZ
frequency	13.56 MHZ
Working gas	Argon+Oxygen
Maximum gas flow	Argon (30 L/min), oxygen (0.15 L/min)

3. Application areas

Flat glass screen:

Mobile phone screen	touch screen
TV screen	Control panel

Printing and packaging industry:

Polymer film

Protective film

Spray printing

Before spray coating

Before printing on plastic plates

4. Installation Instructions

1. The ambient temperature is required to be between 15 and 35 ℃, and air conditioning is required;
2. An oil-free air compressor is required on site. It is recommended to match the power of 2.2KW, the nominal volume flow of 200 L/min, and the
rated discharge pressure: 0.7MPA
3 . Humidity requirement is 40% ~ 80%, no condensation, dehumidifier should be installed;
4. Power grid requirements: AC220V, 50Hz;
5. Power grid fluctuations: ± 5%, grid ground meets international requirements. In areas where the voltage amplitude is more than 5%, automatic voltage stabilization and current stabilization devices should be installed;
6. There should be no strong electromagnetic signal interference near the installation equipment, and there should be no radio transmitting station (or relay station) around the installation site;
7. Ground amplitude: less than 50um; vibration acceleration: less than 0.05g; avoid a large number of stamping and other machine tools nearby;
8. Equipment space requirements to ensure smoke-free and dust-free, avoid metal dusting and other serious working environment;
9. Air pressure: 0.4 ~ 0.7Mpa;
10. In some environments, anti-static floor should be installed to strengthen the shield, etc.;

上一篇：A vacuum chip cleaning chip in Shenzhen

下一篇：A shoe factory in Wenzhou ＂plasma activation of soles instead of manual polishing＂