1. System introduction:

The GHJ331-R ceramic injection valve desktop dispenser system is aimed at the consumer electronics industry dispensing applications (such as mobile phone chip bottom filling, frame hot melt adhesive, fingerprint recognition module, camera module, data line solder joint reinforcement, etc.) Designed high-performance, precise vision system three-axis robot, modified machine with independent research and development of non-contact high-speed injection valve body and simple and friendly intelligent dispensing special software, greatly improving the accuracy and speed of dispensing, extremely Cost-effective.

2. System characteristics:

High intelligence: It integrates small industrial computer, display and robot, and provides intelligent dispensing solutions.
Convenience: Equipped with independent research and development, simple and friendly intelligent dispensing special software, streamlined and convenient.
High flexibility: It can be equipped with various valve bodies, such as injection valve and piezoelectric valve. According to customer needs, it can be flexibly selected: various functional modules are highly integrated and can be selected.

3. Equipment advantages:

1. The overall operation of the equipment is stable and does not shake
2. The X/Y/Z axis of the equipment is controlled by a servo motor + precision screw
3. The operation speed is fast, the precision is high, the maximum operation speed is 500mm/s, and the repeat accuracy is ±0.02mm
4. The operation of the control software is easy to introduce, you can edit the glue trajectory arbitrarily, and you can set the front and back empty running distance, so that the glue is discharged at a uniform speed, and the parameter setting is simple and fast

4. Product configuration

5. Application Case 6. Installation Instructions


 

1. The ambient temperature is required to be between 15 and 35 ℃, and air conditioning is required;
2. An oil-free air compressor is required on site. It is recommended to match the power of 2.2KW, the nominal volume flow of 200 L/min, and the
rated discharge pressure: 0.7MPA
3 . Humidity requirement is 40% ~ 80%, no condensation, dehumidifier should be installed;
4. Power grid requirements: AC220V, 50Hz;
5. Power grid fluctuations: ± 5%, grid ground meets international requirements. In areas where the voltage amplitude is more than 5%, automatic voltage stabilization and current stabilization devices should be installed;
6. There should be no strong electromagnetic signal interference near the installation equipment, and there should be no radio transmitting station (or relay station) around the installation site;
7. Ground amplitude: less than 50um; vibration acceleration: less than 0.05g; avoid a large number of stamping and other machine tools nearby;
8. Equipment space requirements to ensure smoke-free and dust-free, avoid metal dusting and other serious working environment;
9. Air pressure: 0.4 ~ 0.7Mpa;
10. In some environments, anti-static floor should be installed to strengthen the shield, etc.;