Service hotline
19984889199
1. Product Introduction
This machine is specially designed for cleaning and coating the surface of touch screen, computer display, glass tempered film and ceramic material. The rear docking oven or oven
overview: atmospheric pressure plasma processor + anti-fouling and anti-fingerprint film spraying machine is a Fully-automatic processing system, excellent performance, wide processing range, simple and fast operation, reduced chemical liquid consumption, high production efficiency
Features:
1. Small anti-fingerprint coating equipment, small footprint, high productivity
2. Single-sided coating , Simple operation, high coating quality
3, connected with the assembly line, can produce
4, conveyor belt transmission, can be used to produce a variety of products and samples
5, applicable to major pharmacy medicine, after treatment, the water drop angle can reach 110-120 °
Process: original glass-plasma cleaning-AF coating-baking-cooling-plasma cleaning on the reverse side-ultrasonic washing
with protective film out of the warehouse
Second, the machine configuration
| Standard machine configuration | |
| model | RI800+AF2 |
| Equipment size | L3500*W1500*H2160mm |
| weight | 800KG |
| Input power | 220VAC, 50HZ |
| power | 3.5KW |
| frequency | 25KHZ |
| Working gas | Oil-free and water-free compressed air or nitrogen or argon |
| Handle wide format |
800mm (customizable) |
3. Application areas
1. Touch panel protection glass
2. TV protection film
3. Anti-fouling of transparent substrate
4. Electronic screen paper
5. PAD
6. Satellite navigation screen
7. Anti-fouling treatment of glasses
4. Installation Instructions
1. The ambient temperature is required to be between 15 and 35 ℃, and air conditioning is required;2. An oil-free air compressor is required on site. It is recommended to match the power of 2.2KW, the nominal volume flow of 200 L/min, and the
rated discharge pressure: 0.7MPA
3 . Humidity requirement is 40% ~ 80%, no condensation, dehumidifier should be installed;
4. Power grid requirements: AC220V, 50Hz;
5. Power grid fluctuations: ± 5%, grid ground meets international requirements. In areas where the voltage amplitude is more than 5%, automatic voltage stabilization and current stabilization devices should be installed;
6. There should be no strong electromagnetic signal interference near the installation equipment, and there should be no radio transmitting station (or relay station) around the installation site;
7. Ground amplitude: less than 50um; vibration acceleration: less than 0.05g; avoid a large number of stamping and other machine tools nearby;
8. Equipment space requirements to ensure smoke-free and dust-free, avoid metal dusting and other serious working environment;
9. Air pressure: 0.4 ~ 0.7Mpa;
10. In some environments, anti-static floor should be installed to strengthen the shield, etc.;
