Service hotline
19984889199
1. Product Introduction
The structure of the plasma cleaning machine is mainly divided into four major parts, which are the control unit, vacuum chamber , vacuum pump and plasma generator.
Features: The use of numerical control technology, high degree of automation; with high-precision control device, time control accuracy is very high; vacuum plasma cleaning will not produce a damaged layer on the surface, surface quality is guaranteed; because it is carried out in a vacuum, no pollution The environment ensures that the cleaned surface is not contaminated by secondary pollution.
Advantages:
1. The cavity volume and number of layers can be customized according to customer requirements;
2. Simple and efficient processing of irregular shaped products;
3. No pollution in the processing process;
4. Stable processing effect and uniform effect;
5. Simple maintenance and cost Low, easy for customers to control costs
Second, the machine configuration
| Machine configuration | ||
| model | EM060-07 | EM120-09 |
| Way of working | Discharge under vacuum | |
| power | 500W | 500W |
| Processing range | 60L | 120L |
| Equipment size | 850*1050*1600mm | |
| weight | 300KG | |
| Machine power | 220VAC, 50HZ | |
| Vacuum pump power supply | 380V, 50HZ | |
| frequency | 25KHZ/13.56MHZ | |
| Working gas |
Oil-free and water-free compressed air; or argon + oxygen; or nitrogen; or argon-hydrogen mixed gas; or carbon tetrafluoride; |
|
3. Application areas
Biomedical industry
 Infusion tube seat |
 Before coating such as gastric tube |
 Medical device disinfection |
Textile and sole industry
 Before printing |
 Sole cleaning |
 Non-woven fabric flame retardant pretreatment |
IC semiconductor chip field
 GPU chip |
 Wafer |
 chip |
Circuit board industry
 Remove slag before circuit board sinking copper |
 Before printed circuit board |
 Soft copper sink and before printing |
Other industries
 Silica gel |
 ceramics |
 Car central control screen |
 Aviation silver film |
 Polymer access |
 Curved glass |
4. Installation Instructions
1. The ambient temperature is required to be between 15 and 35 ℃, and air conditioning is required;2. An oil-free air compressor is required on site. It is recommended to match the power of 2.2KW, the nominal volume flow of 200 L/min, and the
rated discharge pressure: 0.7MPA
3 . Humidity requirement is 40% ~ 80%, no condensation, dehumidifier should be installed;
4. Power grid requirements: AC220V, 50Hz;
5. Power grid fluctuations: ± 5%, grid ground meets international requirements. In areas where the voltage amplitude is more than 5%, automatic voltage stabilization and current stabilization devices should be installed;
6. There should be no strong electromagnetic signal interference near the installation equipment, and there should be no radio transmitting station (or relay station) around the installation site;
7. Ground amplitude: less than 50um; vibration acceleration: less than 0.05g; avoid a large number of stamping and other machine tools nearby;
8. Equipment space requirements to ensure smoke-free and dust-free, avoid metal dusting and other serious working environment;
9. Air pressure: 0.4 ~ 0.7Mpa;
10. In some environments, anti-static floor should be installed to strengthen the shield, etc.;
